Description of Welded Wire Mesh
Welded wire mesh is constructed with two orthogonal wires that are joined jointly at their intersections using a resistance welding process to sort a grid. The line wires of the grid are guided by means of the welder employing a pattern board. The equipment drops cross wires into area and fuses them with each other to produce the two distinct planes that form welded wire mesh.
Line wires (also known as extended wires) are laid out on a pattern board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped 1 at a time on to the line wires. Then, the cross wires are resistance welded into area setting the panel duration spacing. The panel improvements after the weld and the process starts off in excess of yet again.
Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the middle of two wires (Center to Centre) or by measuring the opening in between two wires (Very clear Opening). We can manufacture standard and custom made welded wire mesh with a sq. mesh spacing variety from 1″ to as large as may possibly be required. Rectangular mesh spacing ranges from 1/2″ x up to as lengthy as may possibly be needed.
Edge Conditions
Welded Wire Mesh has two standard edge conditions: trimmed and untrimmed.
Depth specification:
Substance: reduced carbon steel wire, stainless metal wire
Surface area dealing : black welded wire mesh,
electro galvanized before welded wire mesh,
Electro galvanized soon after welded wire mesh
hot-dipped galvanized prior to welded wire mesh
Sizzling-dipped galvanized following welding wire mesh
PVC-coated welded wire mesh
Electricity coated welded wire mesh
Wire diameter: .45mm to 12.0mm
Gap size: one/3″ to 250mm hole
Gap form: square gap, rectangular gap
Width: .3M to 2.0M
Packing : in roll or in panel
Images of Welded Wire Mesh:
Specification of Welded Wire Mesh:
| Specification Listing of Welded Wire Mesh |
||
| Opening |
Wire Diameter |
|
| In inch |
In metric unit(mm) |
|
| one/four” x one/four” |
6.4mm x six.4mm |
22,23,24 |
| three/eight” x 3/eight” |
ten.6mm x 10.6mm |
19,20,21,22 |
| one/two” x one/two” |
12.7mm x twelve.7mm |
sixteen,17,18,19,20,21,22,23 |
| 5/eight” x five/eight” |
16mm x 16mm |
18,19,20,21, |
| three/4″ x 3/four” |
19.1mm x 19.1mm |
16,17,eighteen,19,twenty,21 |
| one” x one/two” |
25.4mm x 12.7mm |
sixteen,seventeen,eighteen,19,20,21 |
| 1-one/2″ x one-one/2″ |
38mm x 38mm |
14,15,16,seventeen,eighteen,19 |
| one” x 2″ |
twenty five.4mm x fifty.8mm |
14,15,sixteen |
| 2″ x two” |
50.8mm x 50.8mm |
twelve,thirteen,14,15,16 |
| CZPT Observe: one,CZPT roll duration: 30mwidth: .5m to 1.8m 2,Particular dimensions CZPT at request 3,Packing: in watertight paper in rolls. CZPT packing CZPT at ask for. |
||
Packing and Shipping:
Companies Presented:
Totally free sample providers
We offer samples,with sample fees,shipping and taxes paid by the purchaser.
CZPTize providers
We can produce several types of welded mesh goods,if you have your own style or have specificationdrawing,we can make goods as your necessity.
If you do not have any thought, remember to explain to us exactly where will it be making use of, we will give you some specification to refer,and we can give the drawing also.
After-Sales Providers
Our after-sales services start instantly following signing the deal.
1.No issue FOB or CIF the value time period is we would attempt our ideal to uncover a least expensive freight cost for customers’ reference.
two.We will deliver manufacturing process images to customers for their inspection.
3.Do our best to help consumer organize the shipment and customs clearance.
four.Installation, maintenance and restore directions with entire information.
